A Brief Guide On How To Install Roll Roofing On A Shed

how to install roll roofing on a shed

A Brief Guide On How To Install Roll Roofing On A Shed

There are many factors involved when learning how to install roll roofing on a shed. The first consideration is the size of the shed. While a shed can be large or small, it should always be constructed with the proper eye level so that it will be easy for workers to work in close proximity to each other without hitting obstacles in the way. The next consideration for the homeowner or property manager is the location of the shed and whether or not it is in an area where it receives plenty of direct sunlight during most of the day.

The shed must also be placed on the right side of the home, as well as on the correct side of any street, alley, or private drive. This is often not a difficult concept for those who have installed other types of roll roofing. However, installing roll roofing on a shed is quite different, mainly because it has to withstand the rigors of inclement weather. This may require that the shed is left outdoors during some of the coldest months of the year.

One of the main considerations when learning how to install roll roofing on a shed involves the rafters. While they are integral to the entire structure, these should be kept very clean. It is recommended that the owner use a sander to smooth out any rough spots. It is also important to check for any areas of the rafters that may become loose due to bad weather, leaning the shed against a wall, or simply bending in a certain way. When this happens, excess moisture from the air in the area can cause rotting and blistering.

The next step to learning how to install roll roofing on a shed begins with measuring the exact location of each rafter. Each one should be at least two feet away from adjacent rafters, which is the most logical spot to install the shed’s roof shingles. The spacing must be a minimum of three feet to allow for an even weight distribution. If the shed is leaning against a wall, the spacing should be increased to four feet. When learning how to install roll roofing on a shed, it is important to remember that the actual roofing shingles may not be installed until much later, when the weather becomes cold and more freezing temperatures set in.

Knowing how to install roll roofing on a shed is important because it gives the shed owner a great deal of control when building the structure. The roofing shingles can either be placed higher or lower than the surrounding area. This can allow for different styles of roof, such as flat roofing or sloped roofing. Of course, when a shed has more than one level, the addition of a trellis will give the shed an extra level of shelter from the elements. No matter how one chooses to put the shingles onto the roof, they need to be installed properly in order to avoid leaks and the other issues that come along with poorly installed shingles.

When learning how to install roll roofing on a shed, it is vital to have all of the tools needed to ensure a successful installation. This includes the basic carpenter’s tools, such as a hammer, saw, hand drill, nails, screws, and roofing nails or spikes. The shed’s location, height, and orientation will also affect which type of roofing is best installed, so it is essential to study the area where the shed will be located before beginning the process. Once all of the necessary tools are gathered, the shed owner can begin installing the new roof.

This entry was posted in General. Bookmark the permalink.