How to Do Roofing With Shingles

how to do roofing shingles

How to Do Roofing With Shingles

When one is planning how to do roofing shingles, there are certain tips and tricks that are important to follow. Asphalt shingles are not the only type of roofing material that can be used for a home’s exterior. Other roofing materials such as slate and wood shingles can be used if a home has an adequate amount of area that can be covered. This article will focus on how to do roofing shingles on asphalt and metal roofs.

Prior to beginning installation of the shingles, the ground must be properly prepared. Failing to do this will prevent the asphalt and other materials from set and allowing for the shingles to be installed properly. This preparation includes making sure that there are no underground elements such as nails, gravel, or any other items that could be dangerous. Once this has been completed the ground can be excavated for the roofing shingles.

There are two types of materials that can be used to create the shingles. Aluminum and wood shingles can be purchased in any local hardware store. The materials used are placed over the prepared ground in a metal or asphalt tarp. The top layer of the shingles will be made of asphalt while the bottom layer will be made of the material used. Depending upon the weather conditions where the house resides, different levels can be made.

The first step in how to do roofing should include examining the existing roof to make sure there are no hidden dangers. Caulking leaks and damaged areas around the house can allow water to get underneath and around the shingles and eventually cause them to deteriorate. Caulking can also be used to repair a leak in a roof. It should be inspected regularly to make sure that everything is functioning properly.

One of the most important parts of learning how to do roofing with shingles is the step used to nail the roofing shingles down. Nail down the shingles one at a time using nails that are either a nails or screws. The nail used should be large enough so it can easily be driven into the shingle. Do not rush through this step as this will only lead to further damage down the road.

The final step in learning how to do roofing with shingles is to climb up the ladder and begin painting the roof. This should only be done when the nails have been driven all the way through. This helps give the roofing material a better grip on the roof. Make sure that you have plenty of water on hand because if you wait to dry after painting the roof before climbing up there will be water spots everywhere. Keep in mind, the easiest way to learn how to do roofing with shingles is to follow the step by step instructions found in many of the good roofing books that are available on the market today.

This entry was posted in General. Bookmark the permalink.