If you are like most homeowners, one of the biggest problems that you have to deal with is how to install roofing flashing. You know the basics of how to install flashing on your drywall, so it may seem like an overwhelming task when faced with this situation. However, installing flashing is not as difficult as it seems, provided that you follow instructions carefully. Even if you do not know how to install roofing flashing correctly, you can still perform this task without hiring a professional to help you. Here is how to do it by yourself:
First, you have to identify the area where the metal roof is going to be attached. You can use the dimensions that are provided in the manufacturers’ manuals for the different types of materials that you are using for your home. Once you know the location, the next step is to prepare the area. To start off, you can build up a footing to keep the flash in place and to make sure that the flash does not move while it is being installed. For this purpose, you will need to dig some holes in the ground around where you are going to put the metal roof.
You can choose to use shims between the holes that you have dug. However, if you want to avoid having to replace the shims once you install the metal roof installation, you should go ahead and use screws. Once you have aligned the screws in their positions, you can start putting the metal roof installation guide piece inside the holes. This is a flexible piece of paper that comes in various sizes. You can easily trace the patterns on the guide sheet so that you will know how to position and anchor the flashing before you seal the edges of the guide.
Once the guide sheet is in place, you will then proceed to install roofing tacks on the guide and over the nails that you used to anchor the guide. The last step is to secure the flashing to the surface with roofing nails. By following the do-it-yourself strategy for roofing installation, you can easily finish this task without having to pay for any professional help.
Installing metal roofing is different from installing shingles in that the first one has to be carried out with utmost caution as it can result in damage to the building. The other method is the use of a hot lamination for roofing systems. However, such a process requires the replacement of the old roof and therefore, is quite expensive. The do-it-yourself strategy can save you money because you will only need to spend on the metal roofing material itself.
The advantage of doing the roof yourself is that you will be able to learn the entire process in a few hours time. On the other hand, hiring professionals will cost you several hundred dollars. The best part is that you will not have to spend much money on roof repair in the future because such damage can be removed easily. As mentioned earlier, following the do-it-yourself strategy is one of the best ways to successfully install metal roofing. You can easily do this in your spare time or when you have the time.