How to Install Shingle Roofing – The Basic Steps
It is not as difficult as you might think when you are learning how to install shingle roofing. There are three simple steps to this, and once you complete these you should have no problem putting the roofing on your own. These three steps include measuring, cutting and nailing. If you follow the correct steps it will be a relatively painless experience.
First, the measurements. The size of the area that you are going to be working on is one of the most important things to take into account. It will affect how many materials you will need to buy or if you can borrow any materials from a friend or relative. Once you know the size of the area you will need, find a piece of paper that has an accurate measurement of the area. The width and length of the roof should be between two and three feet, depending on the length of the shingles that will be used. The length of the space that you have to work with will determine the number of flashing that you need to buy or if you can borrow any from a relative or friend.
After you have the precise measurements, you will have to choose the material that you want for your roof. There are many different kinds of shingles, and you have to know what you are getting before you go out and start shopping. If you only have to replace a few shingles or need some repair work done, then you may be able to get by with only metal flashing. If you need to replace the entire roof, then you will have to make sure that you are purchasing the right material.
Next, you have to choose the type of flashing that you are going to use. Shingle roofing can either be metal flashing or wood shingles. Metal flashing is usually preferred because it is more durable and rust resistant. On the other hand, wood shingles are usually cheaper and look more natural.
Before installing the shingles on the roof, you will have to prepare the area first. If you are installing the shingles on a metal roof, then you have to make sure that there are no exposed nails or shims in the attic. In this case, you will have to use caulk to fill in any voids in the area. For shingle roofing that are made of wood, then you have to first remove all debris and nail all areas that come into contact with the shingles. Once this is done, then you have to fill the gaps with shingles. Make sure that you are doing a straight line so that your shingles will be able to face the roof straight.
To summarize, the important steps in learning how to install shingle roofing are preparation of the area, laying down the flashing and then installing the shingles. As mentioned earlier, you have to make sure that there are no exposed nails or shims in the attic. You also need to use a chalk line to ensure that the area is straight. Once you have followed these steps, you can already start roofing your home. Just remember to anchor your eaves trough before installing the flashing and sidewall shingles.